RED ROOM

PROP STORAGE & FIRST AID:

Props are located in the prop armoire (see 1). There are two set of each common props.

First aid kit is located on the top shelf of the armoire.

CLEANING:

Cleaning bottles are located at corner between the door and tool armoire (see 9). Please use alcohol to spread only vinyl and pvc surface. For floor please only use soap and warm water to take off any grease. Trash needs to be placed in trashed can in the room.

SUPPLY CLOSET:

Supply closet is located outside the room, in the pathway to the storm(bilco) door. There you can find immediately necessary items.

THE THRONE:

The throne(see 7) is a piece of true antique furniture, it’s for SITTING only! If you pose with the throne, do not place your dirty shoes or with any latex gears on it. Please respect the furniture.

OUTLETS:

There are three (X1, X2, X3) outlets in this room-one for each wall, excluding the wall of the window opening. Each outlet is occupied one or two appliances. If you remove a plug for your own purpose, please make sure to restore what was plugged in before.

Lights:

The main light control is located by (see 8). There is a small remote control in a wall holder that can change, adjust and restore each track light to colored or day light. The color light intensity isn't as strong as the daylight intensity, you might be able to increase the level by pressing the upward arrow button on the controller. The lamps at the far end of the room is plugged into an outlet which doesn’t require turning off the lamps.

REMOTE CONTROLS:

There is a small remote control in a wall holder that can change, adjust and restore each track light to colored or day light. The color light intensity isn't as strong as the daylight intensity, you might be able to increase the level by pressing the upward arrow button on the controller. The lamps at the far end of the room is plugged into an outlet which doesn’t require turning off the lamps.

DOs & DON’Ts:

DOs:

  1. Lock the door and make sure it’s locked securely. The weather strip makes it harder to shut the door tight.

  2. Leave all remotes in its wall holder

  3. Arriving at least 30 min early to make sure all tool and supplies are gathered.

  4. Clean and return all tools to their original placement

  5. Return furniture to original spaces

    DON’Ts:

  6. Use the remote controls without returning to wall holder

  7. Leave door open during session

  8. Leaving without cleaning the space

  9. Move and unplug furniture without returning to original placement

  10. Leave behind personal belongings